Aali first flush diverter is a simple device that diverts the first flow of rainwater away from a rainwater filtration system or rainwater storage system. The first pass of rainwater in any rainy-day essentially washes your roof of all the sediments, leaves and debris that have collected in between the rainy days. It is very important and necessity to divert the first flush water to ensure cleaner water in your Rainwater filtration system or storage system.
Products for Rainwater harvesting
Aali First Flush Diverter , 4 inch
₹790.00
Aali first flush diverter is a simple device that diverts the first flow of rainwater away from a rainwater filtration system or rainwater storage system. The first pass of rainwater in any rainy-day essentially washes your roof of all the sediments, leaves and debris that have collected in between the rainy days. It is very important and necessity to divert the first flush water to ensure cleaner water in your Rainwater filtration system or storage system.
PERFORMANCE
- Aali first flush diverter stops leaves, sediments and debris entering your rainwater filter or rainwater storage area.
- It diverts and captures the most contaminated, sediment-laden water that washes into your pipes from your roof during the first initial millimetres of rain.
- It protects your rainwater filter/storage tank from sediment laden water.
- It protects your rainwater filter/storage tank from large particles that are washed from roof.
- Shields the clogging of your rainwater filter/rainwater pipes
BENEFITS
- 60% – 80% reduction of maintenance time of your Rainwater harvesting system
- Greatly improves the efficiency of your Rainwater filter system
- Helps to improve the Quality of Rainwater
- Clean Rainwater to your Rainwater harvesting system
INSTALLATION
- DIY Installation on 4-inch rainwater down pipe
- The first flush diverter can be installed on your Rainwater downpipes with a simple Tee joint with Door.
- Simply add and install the length of pipe required to meet your diversion needs. This will be based on the volume of dirty, contaminated water you wish to divert.
- The length of pipe required to setup first flush diversion on the Rainwater pipe will depend upon Roof condition (leaves and debris) and how much water you need to isolate and capture.
The following guidelines may help you to calculate how much rainwater you should divert according to Indian architecture and environment:
- Roof with low pollution (open fields, no trees, no bird nest, clean environment) = divert 0.5 litres of water per 10 square foot of roof
- Roof with higher pollution (leaves and debris, bird nests, pollution) = divert 2 litres of water per 10 square foot of roof.
Availability: In stock